<delect id="djndb"><address id="djndb"><rt id="djndb"></rt></address></delect>
      <em id="djndb"><ins id="djndb"></ins></em>
      <sup id="djndb"><meter id="djndb"></meter></sup>

      <em id="djndb"><ins id="djndb"></ins></em>

        您好,歡迎進入無錫盛發地坪科技有限公司官網!

        無錫盛發地坪科技有限公司

        專業成就品牌

        提供設計環氧地坪施工

        13338775552
        無錫盛發地坪科技有限公司
        常見問題
        您的位置: 首頁 > 新聞資訊 > 常見問題
        哪些因素造成環氧地坪漆表面黯淡無光?
        發布時間:2019-03-15瀏覽次數:36

        環氧地坪漆因為其優秀的裝飾效果,色彩多樣,表面光滑平整、光澤亮麗(啞光面除外),特別是環氧自流平地坪表面能達鏡面效果,一直深受人們的喜愛。但是有些消費者發現無錫環氧地坪漆施工后表面光澤度不夠、黯淡無光,嚴重影響環氧地坪漆的表面視覺效果。這是什么原因呢?又該如何預防呢?

        Because of its excellent decorative effect, various colors, smooth surface, bright gloss (except matte surface), especially the mirror effect of the self-leveling epoxy floor paint, has been deeply loved by people. However, some consumers find that the surface gloss of epoxy floor paint is not enough and dull after construction, which seriously affects the surface visual effect of epoxy floor paint. What is the reason for this? And how to prevent it?

         環氧地坪漆表面暗淡無光的原因:

        Reasons for dull surface of epoxy floor paint:

        1、因為貪圖便宜,選擇了環氧地坪漆價格相對較低卻質量有問題的材料,導致施工后的環氧地坪達不到預期的效果。

        1. Because of the greed for cheapness, epoxy flooring paint has been chosen for materials with relatively low price but poor quality, resulting in the construction of epoxy flooring can not achieve the desired results.

        2、環氧地坪漆材料使用時沒有按照廠家的要求加入了過量的稀釋劑,或者選擇的稀釋劑不配套,沸點低,揮發過快。

        2. When using epoxy floor paint material, there is no excessive diluent added according to the requirements of the manufacturer, or the selected diluent is not matched, boiling point is low and volatilization is too fast.

        3、在上一道涂層未完全干透就進行面漆的施工,導致環氧環氧地坪漆黯淡無光。

        3. The application of topcoat before the last coat is completely dried leads to a dull epoxy floor paint.

        4、基層地面沒有使用環氧地坪研磨機打磨平整,地面粗糙,導致環氧地坪漆施工后也不平整,光線折射導致涂膜表面光澤度不夠。

        4. The base floor is not polished flat by using floor grinder, and the ground is rough, which results in the unevenness of epoxy floor paint after construction. The light refraction results in the insufficient gloss of the coating surface.

        5、環氧地坪漆施工時環境溫度過高,過高的溫度會導致地坪漆起皺,影響表面的光澤度。

        5. When epoxy floor paint is constructed, the ambient temperature is too high. Excessive temperature will cause wrinkling of the floor paint and affect the gloss of the surface.

        6、環氧地坪漆施工現場環境濕度過大(相對濕度80%以上),導致環氧地坪漆漆膜吸收水分后泛白,失去光澤。

        6. The environmental humidity of epoxy floor paint construction site is too high (the relative humidity is over 80%), which causes the epoxy floor paint film to become white after absorbing water and lose luster.


        避免環氧地坪漆黯淡無光的方法:

        Method to avoid dull epoxy floor paint:

        1、選擇正規地坪漆廠家生產的有質量保證的材料。

        1. Choose materials with quality assurance produced by regular floor paint manufacturers.

        2、嚴格按照地坪漆廠家的要求,添加環氧地坪漆配套的稀釋劑。

        2. In strict accordance with the requirements of flooring paint manufacturers, add diluents for epoxy flooring paint.

        3、面漆施工時一定要等待上一涂層完全干透。

        3. When topcoat is applied, it must wait for the top coat to be completely dry.

        4、環氧地坪漆施工前一定要用地坪研磨機將地面打磨平整,并將油污、雜物等清理干凈。

        4. Before the construction of epoxy floor paint, the ground must be ground flat by a floor grinder, and the oil and sundries should be cleaned up.

        5、環氧地坪漆最佳施工溫度是5-25攝氏度,施工時要避開高溫時段;

        5. The optimum construction temperature of epoxy floor paint is 5-25 degrees Celsius. It is necessary to avoid high temperature during construction.

        6、無錫環氧地坪漆施工時環境濕度不能高于80%。

        6. The ambient humidity should not be higher than 80% during the construction of epoxy floor paint.


        標簽:地坪 全部
        網友評論

        管理員

        該內容暫無評論

        美國網友
        13338775552
        向日葵图片简笔画